best isolated pedal power supply GHOST FIRE UR-1000 Rechargeable Guitar Pedal Power Supply – 9V/12V/18V – Ghost Fire Audio

best isolated pedal power supply GHOST FIRE UR-1000 Rechargeable Guitar Pedal Power Supply – 9V/12V/18V – Ghost Fire AudioGHOST FIRE UR 1000 Rechargeable Guitar Pedal Power Supply FEATURES Power bank with 5 direct voltage outputs for powering effects with a high power consumption and multi effects devices 4 x isolated output: 2 x9V at 0. 3 A each, 2 x 9V at 0. 5 A each 1 x non isolated output: 9V 2 A 12V 1. 5 A 18V= 1 A(voltage can be 1x output: USB C18 W for power supply and for charging tablets and phones High current rating for modern digital effects LED monitoring on

GHOST FIRE UR-1000 Rechargeable Guitar Pedal Power Supply

FEATURES

• Power bank with 5 direct voltage outputs for powering effects with a high power consumption and multi-effects devices

           - 4 x isolated output: 2 x9V at 0.3 A each, 2 x 9V at 0.5 A each

           - 1 x non-isolated output:9V---2 A/12V---1.5 A/18V=--1 A(voltage can be 

• 1x output: USB-C18 W for power supply and for charging tablets and phones
• High current rating for modern digital effects
• LED monitoring on every output
  
• Compact design for easyinstallation below the pedal board
  

WHAT'S IN PACKAGE

• 1✖️ UR1000 Power Supply  1 ✖️ AC to DC adapter
  7✖️ DC cables                      1 ✖️ 9V Battery Clip Cable
  1 ✖️ Reversed Polarity Cable
  4✖️ Cable Locker Set
  1✖️ User Manual
  1✖️5.5*2.1mm-5.5*2.5mm Cable(black-green)
  *Applicable to LINE 6 ® Hxstomp
  1✖️5.5*2.1mm-5.5*2.5mm ReversedPolarity Cable(red-green)
  *Applicable to EVENTIDE ® H9/H90 etc

CONNECTIONS

1. Connect  the device the device to the power grid using the included power supply. This charges the built-in lithium battery, The indicator LED ② indicates the charging process.
2. Turn on the device on using the main switch ①.
3. Use outputs ⑤ and suitable power supply cables to connect effects pedals or similar devices that require 9V=--= of supply voltage at a maximum of 0.3 mA or a maximum of 0.5 A.
4. Use output ⑥ and suitable power supply cables to connect effects pedals or similar devices that require 9V---,12V=-- or 18 V of supply voltage at a maximum of 1 A, 1.5 A or 2 A. Move the corresponding switch into the position for the required voltage
5. Each output that is ready for operation is indicated by an LED that lights up green. lf an overload of one output causes it to be switched off, the LED lights up red. In that case, disconnect the relevant pedal from the device. Normal voltage provision is restored after approx. 2 seconds.
6. To turn off the device, press the main switch ①.

Technical specifications

Input connections            Power supply         Socket for power adapter
Output connections         1 x USB-C 18 W
                                           2 x DC socket 9V --- 0.3 A (isolated)
                                           2 x DC socket 9V--- 0.5 A (isolated)
                                           1xDC socket 9V--- 2A/12V--1.5 A/18V=--1A(not isolated)

Maximum output power:

Output USB-C:             18W
Output 1 - 4：               14.4W
Output 5:                       18W
Output USB-C + output 5:              36W
Output USB-C + output 1 - 4 ：     32.4W
Output USB-C + output 1 - 4 + output 5：  32.4W
Output 1 - 4  + output 5：   32.4W